en
ISOMETER® isoHR685W

ISOMETER® isoHR685W

  • 10GΩ measurement for oil and gas applications
  • Integrated web server and Modbus TCP communication
  • Early detection enhances operational safety and maintenance planning possibilities.
  • Synchronisation in systems coupled via capacitances
  • High adaptability to systems with different properties
  • For early warning and earth fault location

The ISOMETER® is an insulation monitoring device in accordance with IEC 61557-8 for IT systems. The devices are universally applicable in AC, 3(N)AC, AC/DC and DC systems. AC systems may include extensive DC-supplied loads (such as rectifiers, inverters, variablespeed drives).

This device is used for subsea cable fault finding, measuring up to 10GΩ to monitor and detect deterioration of insulation resistance levels at an early stage in the oil and gas industry. 

  • Features
  • Applications
  • Accessories
  • Ordering information
  • Downloads
  • ISOMETER® for IT AC systems with galvanically connected rectifiers or inverters and for IT DC systems (IT = unearthed systems)
  • Automatic adaptation to the existing system leakage capacitance
  • Combination of AMPPlus and other profile-specific measurement methods
  • Two separately adjustable response value ranges of 1 kΩ…3 GΩ for alarm 1 and alarm 2
  • High-resolution graphic LC display for excellent readability and recording of the device status
  • Connection monitoring (monitoring of the measuring lines)
  • Automatic device self test
  • Graphical representation of the insulation resistance over time (isoGraph)
  • History memory with real-time clock (buffer for three days) for storing 1023 alarm messages with date and time
  • Current or voltage output 0(4)…20 mA, 0…400 μA, 0…10 V, 2…10 V (galvanically separated), which is analogous to the measured insulation value of the system
  • Freely programmable digital inputs and outputs
  • Remote setting via the Internet or Intranet (Webserver/Option: COMTRAXX® Gateway).
  • Worldwide remote diagnosis via the Internet
  • RS-485/BS (Bender sensor bus) for communication with other Bender devices
  • ISOnet: Internal separation of the ISOMETER® from the IT system to be monitored (e.g. if several IT systems are interconnected)
  • BCOM, Modbus TCP and web server
  • AC, DC or AC/DC main circuits
  • AC/DC main circuits with directly connected DC components, such as rectifiers, converters, variable-speed drives
  • UPS systems, battery systems
  • Heaters with phase control
  • Systems including switch-mode power supplies
  • Coupled IT systems with high leakage capacitances
  • Monitoring of long capacitive coupled lines
  • Monitoring of submarine cables

 

Mandatory accessories for ISOMETER® isoHR685W


DescriptionArt. No.
A set of screw terminals*B91067901
A set of push-wire terminalsB91067902
Enclosure accessories (terminal cover, 2 mounting clips)*B91067903
Transparent cover 144x72 (IP65) for FP200**B98060005
* included in the scope of delivery
** If the “transparent front cover 144x72 (IP65)” is used, the cutout in the control cabinet must be increased in height from 66 mm to 68 mm (+ 0.7 / -0 mm).

 

Variants of ISOMETER® isoHR685W


TypeNominal system voltage range UnSupply voltage USDisplayArt. no.
isoHR685W–D–I–BAC 0…1000 V; 0.1…460 Hz /
DC 0…1300 V
AC 24…240 V; 50…400 Hz /
DC 24…240 V
integratedB91067025W
isoHR685W–S–I–B + FP200W*AC 0…1000 V; 0,1…460 Hz /
DC 0…1300 V
AC 24…240 V; 50…400 Hz /
DC 24…240 V
detachedB91067225W
* only available in combination

Downloads for ISOMETER® isoHR685W

Category

Language

Category Product Language Size Download