- Charge Controller
- Charge Controller
CC613 charge controller
- Integrated dynamic load management (DLM)
- Integrated Powerline Communication (PLC) in accordance with ISO 15118
- Integrated emergency opener
- Smart-grid-capable through OCPP 1.5 and 1.6 (JSON and SOAP)
- Integrated 6 mA DC fault current detection/monitoring enables the use of an RCD type A, no RCD type B required
- Ethernet interface and integrated 4G modem
The next generation of smart charge controllers
The CC613 is the next-generation intelligent charge controller. Just like its predecessor CC612, the CC613 is the brain of an intelligent charging station: It communicates with the vehicle and the backend, monitors the internal hardware of the charging system, the user interfaces as well as the connection between the charging station and the vehicle.
The new CC613 charge controller generation further extends the range of functions of Bender charge controllers. A modified enclosure design integrates an Ethernet interface, which now makes the use of a USB Ethernet adapter no longer necessary. Despite the modified shape of the enclosure, the dimensions of the CC613 are the same as those of the CC612, making it easy to fit into existing charging stations.
The CC613 also features Powerline Communication (PLC) according to ISO 15118 for the implementation of plug & charge as well as DC fault current detection with an externally connected current transformer. In addition, free software updates will be available to extend the functions.
The charge controller features a further developed integrated dynamic load management (DLM), which can also be controlled by a higher-level system. This allows larger charging infrastructures to be managed either locally via the controller or by an existing building management system.
Additional monitoring – increased electrical safety
The CC613 now also has an integrated emergency opener so that, in the event of a power failure of the charging station, the plug can be removed from the vehicle or charging station without having to integrate an additional component in the charging station. This saves space and thus allows the CC613 to be installed in small and compact wallboxes.
To increase protection against electric shock, the CC613 provides PE monitoring, in which the connectivity of the PE connection is continuously monitored. Furthermore, the CC613 offers an integrated weld check detection, which outputs an error message in case of a "welded" contactor or load switch.
- Ordering information
- Charge controller in accordance with IEC 61851-1 (mode 3 charging)
- Master and slave operation configurable
- Setting up charging stations with two charging points: 1 charge controller as data gateway with 4G modem and 1 charge controller as slave without 4G modem
- Dynamic load management to optimally distribute the available power among all charging points and signal the maximum power to the vehicle
- Residual direct current monitoring module (external RCD type A required), different cable lengths can be selected
- Integrated emergency opener for motor control (locking/unlocking) and monitoring of the 12 V supply voltage
- OCPP 1.5 and OCPP 1.6 compliant with JSON and SOAP
- Supported mobile networks: 4G (LTE), 3G (UMTS) and 2G (GSM) with an integrated 4G modem
- 3 USB interfaces:
- 1 CONFIG interface for local configuration and installation of software updates
- 2 USB host interfaces
- Control Pilot and Proximity Pilot communication
- Configurable support for additional SCHUKO socket-outlets
- Meter interface: Modbus TCP and RTU
- User interface modules for customer-specific applications (e.g. RFID, LED, antenna)
- An additional digital input and an additional digital output
- Internal temperature sensors to reduce the charging current regardless of the ambient temperature
- ISO/IEC-15118 Powerline Communication (PLC) for plug & charge and load management systems
- Electric vehicle charging stations, wallboxes or street light charging points
Optional accessories for CC613 charge controller
|RFID110-L1 with RJ45 cable (length 500 mm)||B94060110|
|RFID114 with RJ45 cable (length 500 mm)||B94060114|
|RFID117-L1 with RJ45 cable (length 500 mm)||B94060117|
|Measuring current transformer* W15BS (cable length 1500 mm)||B98080065|
|Measuring current transformer* W15BS-02 (cable length 180 mm)||B98080067|
|Measuring current transformer* W15BS-03 (cable length 320 mm)||B98080068|
|DPM2x16FP (display module)||B94060120|
|Plug kit CC613 (to be ordered separatly)**||B94060129|
|Plug kit CC613 bulk pack ELM4PR-M, ELPR-M (50x)||B94060128|
|Plug kit CC613 bulk pack ELM4PR, ELPR (50x)||B94060126|
** Not included in the scope of delivery of the CC613.
Variants of CC613 charge controller
|Type||Modem||Inderface||RDC-M*||external Modbus||LED||PLC**||User interface||Art. No.|
** Powerline Communication acc. ISO/IEC15118
Downloads for CC613 charge controller