RFID and HMI accessories

One common authentication method is RFID. This also includes NFC technology. These form the basis of all charging cards. Central to the identification is the UID (Unique IDentifier) of an RFID chip.

1. Hardware

Here's a list of available RFID and HMI hardware accessories:

Model	Compatible Charge Controller models
# RFID117-L1	CC612 and CC613 (all variants)	product page
# RFID114		product page
# RFID105-L1		product page
# RFID110		contact Bender sales
# HMI150	CC612, CC613, ICC1324, and ICC1314	product page
# HMI145		product page
# HMI140		product page

1.1. Associated equipment

• Display (for visualization): DPM2X16FP Display Module

1.2. Installation and activation

The RFID module is placed beneath a semi-transparent part of the charging system housing. It should be positioned with a minimum distance of 20 mm from any metal surfaces or metal components to ensure optimal reading performance.

As a Manufacturer

1. Log in to the Legacy Config UI using the default Manufacturer Login Credentials
2. Under Manufacturer set Enable RFID to On
3. Under Manufacturer, set Type of Display to Bender LCD-Module DPM2x16FP
4. At the bottom of the Legacy Config UI, click to apply the changes

tip

When no RFID module is installed, set Enable RFID to Off. This prevents error messages.

As an Operator

Prerequisite

The Manufacturer must have set the HMI up correctly

1. Log in to the Config UI using the default Operator Login Credentials
2. Under AUTHORIZATION > RFID Settings set Enable RFID to On
3. At the bottom of the Config UI, click , then click to apply the changes

2. RFID support

2.1. Standards

Supported RFID-related standards:

ISO/IEC 14443 A 1-4

ISO/IEC 7816

NFC Forum Type 2

MIFARE® EV1-2

3DES Encryption

EN 50364

EN IEC 61851-21-2

EN IEC 62368-1

EN IEC 63000

ETSI EN 300 330

ETSI EN 301 489-1

ETSI EN 301 489-3

2.2. Tag types

The Charge Controller family supports all MIFARE® variants:

MIFARE Classic® EV1 1K-4K

MIFARE Ultralight®

MIFARE Ultralight® EV1

MIFARE Ultralight® C

MIFARE Plus® S

MIFARE Plus® X

MIFARE Plus® SE

MIFARE Plus® EV2

MIFARE® DESFire®

MIFARE® DESFire® EV1-3

MIFARE® 2GO

MIFARE® SmartMX

2.3. Additional notes

• With the MIFARE® DESFire® EV2, we support the EV2 security features
• Only the UID can be read
• Limited support for rolling UIDs. We advise against rolling UIDs

2.4. Recommendations

• For increased security, always use EV2