RFID and HMI accessories
One common authentication method is RFID. This also includes NFC technology. These form the basis of all charging cards. Central to the identification is the UID (Unique IDentifier) of an RFID chip.
1 Hardware
Here's a list of available RFID and HMI hardware accessories:
1.1 Associated equipment
- Display (for visualization): DPM2X16FP Display Module
1.2 Installation and activation
The RFID module is placed beneath a semi-transparent part of the charging system housing. It should be positioned with a minimum distance of 20 mm from any metal surfaces or metal components to ensure optimal reading performance.
- As a Manufacturer
- As an Operator
- Log in to the using the Manufacturer
- Under Manufacturer set
Enable RFIDtoOn - Under Manufacturer, set
DisplayTypetoBender LCD-Module DPM2x16FP - At the bottom of the , click to apply the changes
tip
When no RFID module is installed, set Enable RFID to Off. This prevents error messages.
Prerequisite
The Manufacturer must have set the HMI up correctly
- Log in to the using the Operator
- Under AUTHORIZATION > RFID Settings set
Enable RFIDtoOn - At the bottom of the , click , then click to apply the changes
2 RFID support
2.1 Standards
Supported RFID-related standards:
ISO/IEC 14443 A 1-4
ISO/IEC 7816
NFC Forum Type 2
MIFARE® EV1-2
3DES Encryption
EN 50364
EN IEC 61851-21-2
EN IEC 62368-1
EN IEC 63000
ETSI EN 300 330
ETSI EN 301 489-1
ETSI EN 301 489-3
2.2 Tag types
The Charge Controller family supports all MIFARE® variants:
MIFARE Classic® EV1 1K-4K
MIFARE Ultralight®
MIFARE Ultralight® EV1
MIFARE Ultralight® C
MIFARE Plus® S
MIFARE Plus® X
MIFARE Plus® SE
MIFARE Plus® EV2
MIFARE® DESFire®
MIFARE® DESFire® EV1-3
MIFARE® 2GO
MIFARE® SmartMX
2.3 Additional notes
- With the MIFARE® DESFire® EV2, we support the EV2 security features
- Only the UID can be read
- Limited support for rolling UIDs. We advise against rolling UIDs
2.4 Recommendations
- For increased security, always use EV2